Best guides

How To Clean Slate Shower With 4 Simple Steps

Even without a fire, the slate fireplace surround in my living room creates a cozy, earthy atmosphere.

Slate is a prominent building material that is utilized in interior and exterior walls, floors, countertops, and backsplashes in addition to fireplace surrounds.

It is well-liked for both its toughness and natural beauty. But beauty only endures under good maintenance. I had to do some study on how to clean slate in my home as I grew up with a brick hearth and had no experience with it before. How to clean slate shower?Here is what I have discovered.

What is you prepare

  • Broom with soft bristles
  • a soft dusting cloth (no rags pretreated with oils)
  • superior dust mop (non-oil-based)
  • Bucket
  • hot water
  • Gentle Detergent (such as you use on clothes)
  • damp mop
  • supple cleaning cloth

How to clean slate shower

How To Clean Slate Showers

The shower enclosure’s surrounding slate tile gives the entire bathroom a lovely appearance. Slate is a porous stone, thus it needs to be maintained properly when installed in a moist area because it absorbs soiled water in the bathroom more quickly than you might realize. To maintain its luster and beauty, it would therefore be beneficial if you learned how to clean a slate shower.

Method 1: Use a solution of neutral soap and water to clean

Everyone has access to mild soap at home. Soap and water can be used to swiftly clean up spills or remove grime from the slate shower surface. What you must do is as follows:

Step 1: Gather the Materials

  • Buy a soap with a neutral pH. (Hand soaps, dish soap, ivory liquid)
  • acquire a bowl of water
  • Grab a cleaning brush.

Step 2: Prepare the soap and water solution

  • Grab a cup of water.
  • Add soap with a neutral pH to it.
  • To prepare the cleaning solution, carefully combine it.

Step 3: Clean the Surface of the Slate Shower

  • Use a scrub brush to accomplish this.
  • It is submerged in the liquid.
  • To eliminate dirt and soap scum from the stone’s crevices and discoloured surfaces, scrub them.
  • Completely scrub the surface, using pressure to the stubborn stained spots.
  • Do your best to scrub in a circular motion.
  • Set aside time to focus on each of the specified sections.

Step 4: Clean Water Rinse the Surface

  • Use a bucket of fresh water or a hand shower.
  • Clean the slate surfaces of the shower.
  • It will clear the surface of any loose dirt or debris.
  • Review the outcomes and repeat the procedure if necessary.

How to clean slate shower

Method 2: Use commercial cleaners to clean.

Commercial stone cleaners are widely accessible both online and offline. To clean slate tiles, look for stone cleaners that are primarily produced for that purpose. Get one so you can start cleaning your slate shower seamlessly.

Step 1: Apply the commercial cleaner

  • Get the professional stone cleaning.
  • Onto a scrub brush, pour it.
  • Scrub the spots off the slate shower surfaces.
  • Circular motion scrub.
  • Don’t forget to include the nooks and crevices.

Step 2: Rinse the Slate Tile Surface

  • Use a bucket of fresh water or a hand shower.
  • Use it to rinse the slate tile’s surface.
  • Verify the slate shower’s cleanliness.
  • Repeat the entire procedure if results are poor. And this time, scrape it in the challenging spots with a little more pressure.

Some advices when cleaning slate tile shower

  • Make sure the dust mop you purchase is of high quality and does not contain any oil. Most home improvement or janitorial supply businesses have a range of these mops.
    It could be essential to dry mop the floor every day, making sure to take the mop outdoors after each use and give it a good shake. This will depend on where your floor is and how much traffic it receives.
  • Slate installed in a bathroom should be sealed to prevent it from absorbing the excess moisture that is typically present there. You should think about having your slate pre-sealed if it wasn’t already done during installation. Most stone/tile retailers carry stone and tile sealant. Following the label’s instructions, you should apply the sealant in two or three coats, allowing at least 30 minutes in between each layer. Typically, a cotton thread mop should be used to apply the sealant. After the sealer has properly dried, remember to keep your floor maintained as previously mentioned.
  • Use bath mats and/or area rugs on a slate floor near your tub and sink in your bathroom to prevent slips and falls because slate flooring have a tendency to be slippery when wet or moist.
  • On slate flooring, stay away from rubber-backed mats since the rubber may stick to or harm the slate.
    It is acceptable to vacuum a slate floor, but you must only use a gentle brush attachment and be extremely cautious not to bang or yank the vacuum cleaner across the floor since this could result in chipping, scratches, or other types of damage.

Some tips when cleaning slate tile shower

Utilize the Correct Cleaners

Due to its great porosity, slate easily absorbs liquids. Strong cleaners have the potential to etch and discolor the stone, causing significant harm. According to How to Clean Stuff, you’ll need to utilize a cleaner made specifically for use with slate. Do a spot test before applying any cleaner, including one that is labeled safe for natural stone. Choose a hidden region of your shower cubicle and apply a small bit of the cleaning solution there.

The cleanser is probably okay to use in your shower if the slate doesn’t exhibit any symptoms of damage. The cleanser is too abrasive for your slate shower if you see pitting, white residue, or other damage. Additionally, check the tile’s manufacturer’s instructions to determine if any particular cleaning solutions are advised. You can prevent harm to the slate by using just those that the manufacturer suggests.

Real Simple advises against using acidic natural cleaning products like lemon juice or vinegar mixed with water because they could erode the stone’s surface. Make a paste out of baking soda and water and use it to remove stains from your slate shower for a natural substitute.

How to clean slate shower

After use, clean

Cleaning your slate shower every day after your family has finished using it for the day is the most crucial step in keeping it looking good. It’s recommended to stay away from typical liquid or powder shower cleaners because they tend to rest on the slate’s surface too long. Instead, mix a spray shower cleaner with an equivalent amount of warm water and use the mixture to clean your shower. To keep the slate free of streaks and watermarks, proceed with a squeegee. Use simple hot water to squeegee the shower if you’re hesitant to use a commercial cleaner on your slate.

Verify for mildew

Regularly inspect your grout for mildew so you can address the issue before it gets out of hand because slate is readily ruined by potent cleaning products. If mildew is present, clean the grout with a mildew cleaner made for natural stone tile, such as slate. The solution must be effective at getting rid of mold and fungus in your shower while being delicate enough not to harm the slate. To prevent mildew from remaining on the tile surface for too long, thoroughly rinse your shower after using the mildew remover.

Treat soap scum with respect

Soap scum can accumulate on the walls of your shower very fast if you skip cleaning it for a few days. Because many popular chemicals used to remove soap residue are frequently too abrasive for natural stone like slate, it can be challenging to remove the film. Fortunately, there are specialized soap scum removers that are suitable for slate; just check the label to make sure they’re made for use on natural stone.

Use a microfiber cloth rather than your regular rag to clean soap scum off of your tile. You won’t need to be concerned about scratching or pitting the slate because the microfiber is so delicate and soft.

Questions and Answers

What Should I Do to Avoid Making Soap Scum in the Slate Shower?

Keeping a squeegee in the shower is one of the simplest solutions you can take to prevent soap scum in a slate shower. After each use, use it to wipe the slate tile surface.

Alternatively, you can retain an old towel that will serve the same purpose. For more advice on preventing and removing soap scum from the slate shower, read this article.

What Must I Abstain From When Cleaning My Slate Shower?

Scouring powders and other similarly harsh cleansers should be avoided while cleaning slate showers. Additionally, you must refrain from cleaning the slate tiles with metal wool or hard-bristled brushes. To clean slate tiles, it is preferable to use a microfiber cloth.

Is Bleach Safe to Use When Cleaning a Slate Shower?

Yes, you can clean white showers with bleach. But take caution! Hydrogen peroxide, a mild bleach, is effective at removing stains from the slate shower.

When combined with water and hydrogen peroxide in equal parts and sprayed onto the tile surface, this mild bleach also doesn’t harm the surface.

This solution needs to sit for ten minutes. After that, scrape it with a sponge or brush to achieve a clean appearance. For cleaning the slate shower, stay away from any other powerful bleaches.

Why can’t I use vinegar on the tiles in my slate shower?

Vinegar will weaken the stone, so you cannot use it on your slate shower tiles. Lemon & vinegar are typically the best options for all DIY soap scum cleaning needs.

Lemon and vinegar, on the other hand, contain acidic substances that will corrode the surface of natural stones like slate. Over time, it will damage the stone and ruin the appearance of the slate tiles.


Slate tiles are aesthetically pleasing, inviting, and robust. All shower tiles, nevertheless, require routine cleaning, so you should look into this.

A slate shower’s lovely texture can be damaged, and putting off or ignoring the cleaning requirements might result in difficult buildups. Learn the proper cleaning technique from the ways listed above in this tutorial, then implement it. See more useful articles in our website Foto Blog Diario.

Related Articles

Leave a Reply

Your email address will not be published.

Back to top button